HC12Z – 12 ZONE HEAT CONTROLLER
Remote IO PID heat controller designed specifically for directly heated moulds. Up to 12 independently controlled heat zones. Thermocouple type T, K, J and more (user selectable).3PH - 400V (no Neutral required)S7 Profinet or Modbus TCP (user selectable)Local Micro SD card logHMI for monitoring, configuring and troubleshootingPanel Size: 500 x 290 x 240. Weight = 9Kg. IP54.CE marked.
Specifications:
- N of independent heating zones: 12
- Rated Heating power (per zone): 1800W (4.5A – 400V).
- Variable zone size adjustment.
- Control type: Closed loop PID.
- Electrical supply: 3P-400V-32A + PE (No Neutral required). 50/60 Hz.
- Temperature sensor type: TC type T, K, J, S, B, E, R, (user configurable).
- Communication Protocols: S7 (Profinet) or Modbus TCP (user select).
- Physical communication interface: Ethernet RJ45.
- Local log on SD card.
- Internal HMI for system monitoring, setup and troubleshooting.
- IP 54 rating.
- Ambient temperature range allowed for operation: 5-35 C.
- Panel Size: 500 x 290 x 240. Weight = 9Kg.
- CE marked. UL compliance upon request.
Air Heater 36KW (Air Cavity Heater):
Specifically designed for curing top laminate of composite wind blade shells and webs. Stand-Alone heating unit including PLC and HMI. Fully portable for a quick plug and play setup.
Specifications:
- Stand-Alone: Siemens PLC control with HMI for operator input
- Air T inlet (max): 150 deg C
- Air T out (max): 160 deg C
- Flow: 4500 m3/hr @100 mbar
- Power: 3PH-400V-50Hz – 36KW – 62A
- Portable: Mounted on caster wheels with lock. 63A CEE Plug included
AIR HEATER 6KW:
Stand-Alone: Adjustable thermostat. Factory calibrated at 80 deg C Air T surrounding (max): 120 deg C Portable: Carry handle and end hooks for self-support Power: 3PH-400V-50Hz - 6KW - 9A Weight: 11kg
Specifications:
- Stand-Alone: Siemens PLC control with HMI for operator input
- Air T inlet (max): 150 deg C
- Air T out (max): 160 deg C
- Flow: 4500 m3/hr @100 mbar
- Power: 3PH-400V-50Hz – 36KW – 62A
- Portable: Mounted on caster wheels with lock. 63A CEE Plug included
BOND FLANGE HOLDERS:
Retaining system for upstand mouldettes or bonding flanges.
Specifications:
- 3 different models
- Non-stick plastic
- Reusable up to 3x times
- Push in to install
- Pull out to remove
- Up to 100 kg pull force
HEATING CLIP :
Snap heating cable into place - No more gluing cable required
Specifications:
- Heating cable OD range: 1.4 to 2.5mm
- 3x different cable pitches available: 15, 20 and 25mm